Members E-Boats for sale
E-Boat Bits and Pieces
Wanted Section (Boats and bits)
Remember there are other offers referred to in the members only section.
E-Boat Window stickers
E-Boat window stickers (for cars etc.) are normally available at £1.00 each (includes post and packing) from the secretary. Current supplies are low so a reprint is being ordered.
The design is shown here in sample quality only.
The real stickers however are of good quality.
Once the reprint has been received, One sticker will be sent, free of charge, to each 2005 paid-up Member.
|E Boat No. 160 for sale £3,000
Currently afloat on its berth at Anstruther Harbour
Yamaha 4hp outboard; 25litre plastic fuel tank;
All sails in good to very good condition. All sails made by Iolair other than the Spinnaker...
Main Sail with two reefing points and flattener
Genoa No.1; Jib No2; Jib No.3; Storm Jib No. 4; Spinnaker
Plastimo Contest bulkhead mounted Compass
Autohelm Bi-data Speed and Depth, bulkhead mounted; GPS; Large capacity deep cycle battery;
2 x Horseshoe life belts; Additional buoyancy; Portapotti; Portable gas stove; various fenders and warps;
Danforth Anchor with chain and rope; Grapnel Anchor for kedging;
Please note: this sale does not include a road trailer.
For full details of this E-Boat, see HERE
Contact: Rennie Ritchie 01334 655711
|E Boat No. 141 for sale £3,500
Currently ashore on its trailer at Tayport Harbour
Mariner 4hp outboard
Main Sail (Good )
Genoa No1 (Good)
Jib No2 (Fair)
Jib No.3 (Fair)
Storm Jib (Good)
Spare main & genoa in useable condition
Plastimo Mini Contest Compasses x2
NASA Target Log
NASA Target Depth
DSC VHF Radio
Braked 4 wheel RM Trailer, launching trolley & recovery winch in good condition.
Contact: Robert Allan 01382 775600, firstname.lastname@example.org
E-Boat mini tonner. Self tailing recent winches. Deckhand and hull
lined with the forecabin renewed 6yrs ago. 4 berth, chart table, single
burner cooker, Turfor keel winch with recent new wire, Hyde main sail
in good condition with stack pack, Hyde cruising genoa in good
condition with foam luff and roller furling, spinnaker, spinnaker pole,
compass, log, depth sounder, solar panel charging battery, wind
indicator, anchor, fenders and mooring lines. 6hp 4 stroke longshaft
Johnson outboard engine. 2 wheeled braked piggyback combination trailer.|
E-Boat including Trailer , Yamaha 15 HP, in die north of germany , near BREMEN|
Contact Jürgen Saathoff... e-mail
|Mark 2 Raised coachroof version with newer keel profile (higher stability).
One of the last to be built in 1984
Johnson 6hp 4stroke outboard new 2007
New rigging 2005
Headsail furling (genoa by Westaway )
New Main ( Westaway ) 2008
Spinnaker (red / black)
CQR Anchor with chain
Speed, log, depth sounder, vhf
Extra internal buoyancy installed as per E Boat Assocn. recommendation.
Dry berthed every winter
Last full survey 2005
Ashore at Totnes Devon
Roger Bourke tel. 01803 712501
|The boat was built in 1980 and is a MK1. It is in very good condition and has had many extras added.
It is currently situated at my home in Spain near Valencia.
The trailer is 2 wheeled and the boat sits on a detachable launching trailer which can be winched on and off the main trailer.
The boat has various sails:
5 x No.1 Genoa sails (1 with hanks) - various ages and conditions
2 x Spinnakers (one has had repairs made to it)
4 x Main Sails one with battons - various ages and conditions
High Clew No. 2 with hanks
No. 2 Genoa
The interior is fine but could probably do with an update. It has a head, 2 burner stove, sink, seating (bunk cushions in main saloon).
It has 2 rudders, 1 pivoting and 1 standard.
It has a wind up and down winch for the keel (non standard). Plus the original Tirfor Winch (hand crank).
It has navigational equipment by SILVA as follows:
Star Wind which gives wind direction, tacking angles, ideal for racing
Star Sea Data which gives wind speed, direction, boat speed, distance travelled
It also comes with:
Hawk Wind Indicator (brand new) Echo Sounder
Stainless steel fittings (various)
2 x Spinlock Jammers with 3 banks on each
I have a file with full history and E-Boat information and full details of this E-Boat’s fixtures and fittings.
contact Peter Nunn
"I have commissioned a foundry to cast a keel for me the price of casting is very reasonable, £397 + vat. However, I also had to have a pattern made as I could not track down the original. This cost £1,035 + vat. At least now there is a pattern in existence and and any member needing a keel in future can be referred to me."
The pattern is now for sale.
Please contact Ray Wall
Ray Wall, Class Captain, CYBC Dublin.
Please note this is a plea for more than one boat!!! (Rennie)
To advertise on this page please contact the E-Boat Class Association through the webmaster.
Advertising is Free to Class Association Members. Please supply photograph(s) or small scanned images (GIF/JPEG format) along with a modest amount of text which will then be transferred onto these pages. Please note, sending me a composed Word Document with insert Photos will only mean I need to contact you again to ask for the photos to be sent as separate e-mail attachments.... a GIF or JPEG image takes up 100k of my webspace, the same image in a Word Document can use 3 or 4 MB ! Members should try to keep me up to date with sales so we do not display boats which have long since been sold!
Return to E-Boat Main Page.